Carpet, Floor, Rug and Duct Cleaning Services in Hillsboro

We executed a comprehensive multi-stage restoration plan to sanitize and dry the property. First, we performed immediate standing water extraction on the bathroom floor and living room area rugs using a commercial-grade extraction wand. Next, we addressed the structural migration by pulling up the ruined carpet and underlay padding on the stairwell landing to expose the bare concrete slab for direct drying. In the walk-in closet, where moisture had wicked upwards into the walls, we performed a precise flood cut by removing the bottom twelve to eighteen inches of saturated drywall and insulation to expose the 2x4 wooden wall studs. This controlled demolition eliminates hidden moisture pockets and prevents microbial growth. Finally, we thoroughly applied an EPA-approved antimicrobial sanitizer to all affected areas, especially the exposed framing studs and subfloors, and deployed industrial LGR dehumidifiers and high-velocity axial air movers to establish a balanced drying environment and pull deep bound moisture out of the remaining structure.

Teasdale Fenton provided comprehensive mold mitigation, anti-microbial treatment, and detailed cleaning services. This included structural remediation in a basement with exposed ceiling joists, the use of drying equipment (dehumidifiers/air movers), and meticulous cleaning of surfaces like doors and walls to eliminate mold and apply anti-microbial agents.

Our IICRC-certified technicians performed comprehensive water extraction, utilized advanced structural drying techniques, and implemented professional dehumidification to prevent secondary damage and mold growth.

Our team promptly responded to the water damage issue. We utilized advanced thermal imaging technology to accurately detect the extent of the moisture, including hidden water pockets. Following detection, we performed thorough water extraction from the affected carpeted areas using specialized equipment. To ensure complete drying and prevent secondary damage like mold growth, we set up professional-grade drying equipment, including multiple high-velocity air movers and dehumidifiers, throughout the affected space.

Our team provided a comprehensive emergency mitigation and reconstruction (putback) service.  Emergency Stabilization: Secured the exterior with heavy-duty roof tarping and cleared the debris from the collapsed deck structure. Interior Controlled Demolition: Removed saturated drywall and insulation from the vaulted ceilings to inspect the rafters and prevent mold growth. Structural Inspection & Preparation: Evaluated the exposed OSB sheathing and roof trusses for damage while maintaining a climate-controlled environment using industrial air movers. Reconstruction (Putback) Phase: Began the process of re-insulating the ceiling cavities with high-quality fiberglass batts and preparing the interior surfaces for new drywall installation and finishing.

We immediately mitigated the basement water damage by extracting all standing moisture from the concrete floors around the mechanical components and utility systems, treating the exposed subfloor with a professional antimicrobial sanitizer to prevent mold development. To eliminate the residual moisture trapped in the concrete and timber studs, we established a targeted drying profile utilizing commercial air movers and a heavy-duty dehumidifier, ensuring the structural framing and utility lines were thoroughly dried and stabilized against secondary damage.

Our team arrived on-site to provide an immediate and comprehensive restoration. The customer required urgent water extraction and a professional solution to prevent long-term moisture damage or mould growth in their carpeted living areas. To address this, our technicians utilised professional-grade extraction tool to pull standing water from deep within the carpet fibres, followed by a thorough sanitisation and deep cleaning process. We then deployed high-velocity air movers and specialised drying equipment to ensure the subfloor and padding were completely moisture-free, successfully mitigating the damage and restoring the home to a safe, spotless condition.

Our team performed a surgical removal of all affected plaster ceilings and specific wall portions, stripping the structure back to the studs and masonry to ensure any hidden source of contamination was fully exposed and eradicated. To address the client’s primary concern regarding cleanliness, the crew established a professional-grade containment zone by utilising reinforced floor protection and high-visibility poly-containment barriers to seal off doorways and protect household contents from cross-contamination. Following the demolition, a rigorous two-stage decontamination process was executed, involving industrial HEPA vacuuming to clear fine dust from all surfaces and the application of an anti-microbial spray treatment to sanitise the exposed framing and masonry. Recognising the customer’s high sensitivity to dust control, the solution extended beyond simple removal; the team coordinated with the reconstruction department to keep an industrial air scrubber running on-site 24/7. This proactive approach ensures continuous air filtration, capturing airborne particles during the transition to the "put-back" phase and providing the client with ongoing peace of mind.

Full mold remediation services including the setup of containment barriers, usage of specialized equipment for mold removal, comprehensive cleaning of the affected basement areas, and equipment pick-up.

Our team responded to the emergency by removing the fallen tree from the structure. They provided temporary tarping to protect the damaged roof from further elements and then proceeded with comprehensive repairs, including replacing damaged roof sheathing, shingles, and addressing damage to the siding and deck caused by the impact.

Our team implemented a comprehensive water damage restoration and structural drying plan, including, Demolition & Exposure: Removed damaged sections of hardwood flooring and drywall to expose the subfloor and wall studs for direct drying. Site Containment: Installed plastic vapor barriers to isolate the affected work area, maintaining air quality and drying efficiency in the rest of the home. Industrial Drying: Deployed high-capacity air movers and LGR (Low Grain Refrigerant) dehumidifiers to extract deep-seated moisture from timber framing and subflooring. Debris Removal: Conducted a thorough site cleanup of building materials to prepare the space for the final reconstruction phase.

Teasdale Fenton performed comprehensive mold mitigation services. This involved identifying and addressing the source of moisture, setting up containment, removing mold-affected materials, and utilizing specialized equipment like air scrubbers and dehumidifiers to clean the air and dry out the affected areas, ensuring effective mold remediation.